HOT ! XPOWER X-8 Confined Space Fan – 1/3 HP, 1200 CFM, Variable Speed, ETL/CETL

X-8 Confined Space Fan — 1200 CFM Ventilation and Exhaust for Manholes, Sewers, and Tight Access Areas

The XPOWER X-8 is a 1/3 HP induction motor fan rated at 1,200 CFM that functions as both a forced-air blower and an exhaust fan — two operating modes in one unit, which matters when confined space entry protocols require both fresh-air supply and contaminated-air extraction during a job. At 2.5 amps on a standard 115V circuit, it draws significantly less power than comparable centrifugal blowers, allowing multiple units to run on the same circuit during large-scale ventilation setups. The 13.5 lb ABS housing is stackable and light enough for one-person transport into manholes, utility vaults, and subterranean access points where a heavy steel fan is impractical.

X-8 Motor Output, Variable Speed Range, and Power Efficiency

The induction motor design runs cooler and lasts longer under continuous operation than brush-motor alternatives — relevant for jobs where the fan runs for several hours during atmospheric testing and confined space entry.

• 
  1,200 CFM at 1/3 HP — delivers measurable air movement in manholes, utility vaults, and below-grade tunnels where CFM determines how quickly hazardous atmosphere is diluted or cleared


• 
  Variable speed control (1,100–3,300 RPM) — dial down airflow for enclosed spaces where maximum CFM would disturb work surfaces or create turbulence; run at full speed for rapid pre-entry purging


• 
  2.5-amp draw — runs on a standard 15-amp circuit alongside other equipment; low enough to run two units on one 15-amp circuit for supply-and-exhaust configurations


• 
  Dual thermal protection — automatically shuts off if motor temperature exceeds safe operating limits during extended continuous-use sessions


• 
  20 ft power cord with wrap-around storage — reaches from a ground-level outlet down into a standard-depth manhole without an extension cord


• 
  Injection-molded ABS housing — resists impact and moisture exposure in below-grade environments; stackable for transport and storage with multiple units

X-8 Applications and Environments

Confined space entry teams in municipal utilities — water, sewer, and electrical — use the X-8 to purge hazardous gases (hydrogen sulfide, methane) before entry and to maintain continuous fresh-air supply during the work period. Restoration contractors use it for structure drying ventilation in tight attic spaces, crawlspaces, and below-grade mechanical rooms where larger drying fans cannot fit. Pest control operators use it to ventilate treated spaces after chemical application in enclosed building areas. The dual blower/exhaust mode means the same unit that supplies fresh air on entry can be reversed for exhaust-mode clearance after chemical or gas treatment — reducing the equipment count crews carry to the job site. Optional ducting accessories extend the airflow up to 125 ft into confined areas too narrow for the unit itself.

X-8 ETL/CETL Certification and Confined Space Compliance

The X-8 is ETL and CETL certified, meeting UL and CSA safety standards for use in North American commercial and industrial environments. For confined space entry under OSHA 29 CFR 1910.146 (permit-required confined spaces), the X-8 provides the continuous forced-air ventilation required to maintain safe atmospheric conditions during entry. The 1-year limited warranty covers the motor and housing. Not rated for use in classified (explosion-proof) environments — see the XPOWER line for intrinsically safe options if required by your jobsite classification.

Specifications

Documents

X-8 Spec Sheet  

X-8 / X-12 Manual

Video Overview